NT6-N112施克SICK色标传感器

"NT6色标传感器，有如下特点：
得到验证的技术
红光或绿光发光二极管，供选择
可选择明/暗切换
通过电位计进行调整

Sick NT6-N112 Overview
Registration Control Scanner NT6-N112 NPN working distance 9mm 
Sick NT6-N112 Description
LED light source with two switchselectable spectral ranges 
Lens position selectable 
Light- or dark-switching selectable 
Rapid response times

Features 
Dimensions (L x W x H): 64 mm x 80 mm x 30.4 mm 
Sensing distance: 9 mm 
Sensing distance tolerance: ± 2 mm 
Light source 1): LED green 
Wave length: 560 nm 
Light emission: Long and short side of housing, exchangeable 
Light spot size: (O 2.5 mm)
 
Light spot direction 2): Round 
Adjustment: Manual adjustment, potentiometer 
Pull-up/Pull-down resistor: 22 k OHM 3) 
1) Average service life of 10,000 h at TA = + 25 °C  2) In relation to long side of housing  3) With light/dark ratio 1:1   
Mechanics/electronics 
Supply voltage Vs: DC 10 V ... 30 V 
Residual ripple: ≤ 5 Vpp 
Power consumption 1): < 80 mA 
Switching frequency 2): 5 kHz 
Response time 3): > 100 μs 
Switching output: NPN: HIGH = approx. VS / LOW ≤ 2 V 
Switching output: NPN 
Analog output QA: 0.15 mA ... 6 mA 4) 
Connection type: 2 m cable , 4 x 0.34 mm, shielded, PVC, diameter 6 mm, with plug T3104/1 5) 
Circuit protection: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected 
Enclosure rating: IP 67 
Weight: x approx. 540 g (with cable) 
Housing material: Die-cast zinc 
Output current Imax.: 200 mA 
1) Without load  2) With light/dark ratio 1:1  3) Signal transit time with resistive load  4) RL= 10 k OHM, values from black to high gloss  5) Do not bend below 0 °C   
Ambient data 
Ambient temperature: Operation: 0 ... 50 °C
Storage: -25 ... 75 °C 
Shock load: according to IEC 60068 
"

深圳市展控机电设备有限公司是一家**代理工业自动化设备的销售型公司。公司现主营德国施克SICK、日本奥普士OPTEX全系列传感器产品,目前亦经销部分日本基恩士KEYENCE、日本山武YAMATAKE/azbil、日本神视SUNX、美国邦纳BANNER、闽台阳明FOTEK。主要包括工业用光电开关、接近开关、色标传感器、光纤放大器、编码器、槽型传感器、*光栅、激光扫描仪、距离检测器、超声波传感器、条码阅读器、继电器、磁敏开关、液位传感器、荧光传感器、光纤线、电缆线、磁性气缸开关、激光位移传感器、红外传感器、压力传感器、*开关、图像传感器、视觉传感器、手执式条码阅读器、无线射频系统等。展控机电已将所代理的产品广泛应用在全国各地的包装、陶瓷、食品、塑料、喷码、喷漆、运输、**、贴标、造纸、印刷等机械制造业、汽车制造工业、汽车停车系统、仓储物流、航空航天、铁路系统中。本公司一向以诚为本，取价公道，所代理的产品都深得广大客户的信赖和支持。在与客户的合作过程中,以灵活的经营方式,较具竟争的价格,完善的售后服务,在行业里树立了良好的信誉。