供应Tektronix MSO5104

Tektronix MSO5104 1GHz带宽示波器
产品名称: Tektronix MSO5104 1GHz带宽示波器所属**: Tektronix泰克 
编号网址: 1303789084/product/oscilloscope/Tektronix-MSO5104.html      复制网址   


产品Tektronix MSO5104 1GHz带宽示波器的技术参数和随机配件简述：Tektronix MSO5104示波器自动触发、解码和搜索功能，*调试常见串行总线– I2C, SPI, RS-232/422/485/UART, USB2.0。
专有的FastAcq™技术，*发现毛刺和偶发事件。>250,000波形/秒的较大捕获速率，**显示难检异常事件。
Tektronix MSO5104示波器53种自动测量、测量统计、直方图和**波形数学运算，分析设备。
简便地搜索、标记和导航长记录长度，找到事件发生的所有时点。
Tektronix MSO5104示波器自动触发、解码和搜索功能，*调试并行总线。高达60.6 ps的定时分辨率，捕获**跳变。
350多种触发组合，包括建立时间/保持时间触发、串行数据包触发和并行数据触发，*捕获异常信号。
Tektronix MSO5104示波器标配抖动和眼图分析及十几种电源分析、存储器分析等选配软件包，把示波器转换成**应用仪器。
标配4只探头，提供了业内较佳的4pF电容负荷，**准确测量。
Tektronix MSO5104示波器在一台仪器上分析模拟信号和数字信号，在系统级调试复杂的设计。



Vertical System Analog Channels 
Input 
Channels Analog Bandwidth (–3 dB): 1 GHz 
Calculated Rise Time: 350 ps 
DC Gain Accuracy ±1.5%, derated at 0.10%/°C above 30°C 
Bandwidth Limits Depending on instrument model: 1GHz, 500MHz, 350MHz, 250MHz, and 20MHz 
Input Coupling AC, DC 
Input Impedance 1 MΩ ±1%, 50 Ω ±1% 
Input Sensitivity 1 MΩ: 1 mV/div to 10 V/div
50 Ω: 1 mV/div to 1 V/div 
Vertical Resolution 8 bits (11 bits with Hi Res) 
Max Input Voltage, 1 MΩ 300 VRMS CAT II, with peaks ≤ ±425 V
For <100 mV/div derate at 20 dB/decade above 100 kHz to 30 VRMS at 1 MHz, 10 dB/decade above 1 MHz
For ≥100 mV/div derate at 20 dB/decade above 3 MHz to 30 VRMS at 30 MHz, 10 dB/decade above 30 MHz 
Max Input Voltage, 50 Ω 5 VRMS, with peaks ≤ ±20 V 
Position Range ±5 divisions 
Delay between any Two Channels 
(Typical) ≤100 ps (50 Ω, DC coupling and equal V/div at or above 10 mV/div) 
Offset Range 
Range 1MΩ 50Ω 
1mV/div to 50mV/div ±1V ±1V 
50.5 mV/div to 99.5 mV/div ±0.5V ±0.5V 
100 mV/div to 500 mV/div ±10V ±10V 
505 mV/div to 995 mV/div ±5V ±5V 
1 V/div to 5 V/div ±100V ±5V 
5.05 V/div to 10 V/div ±50V n/a 
Offset Accuracy ±(0.005 × |offset – position| + DC Balance)
Note: Both position and constant offset term must be converted to volts by multiplying by the appropriate volts/div term 
Channel-to-Channel Isolation 
(Any two channels at equal 
Vertical Scale settings) (Typical) ≥100:1 at ≤100 MHz and ≥30:1 at >100 MHz up to the rated BW 
Vertical System Digital Channels 
Input Channels 16 Digital (D15 - D0) 
Thresholds Per-channel Thresholds 
Threshold Selections TTL, ECL, User 
User-defined Threshold Range ±40V 
Maximum Input Voltage ±42Vpeak 
Threshold Accuracy ±(100 mV + 3% of threshold setting) 
Input Dynamic Range 30 Vp-p ≤200 MHz
10 Vp-p >200 MHz 
Minimum Voltage Swing 400 mV 
Input Impedance 100 kΩ 
Probe Loading 3 pF 
Vertical Resolution 1 bit 
Horizontal System Analog Channels 
Maximum Sample Rate (All channels) 5 GS/s 
Maximum Sample Rate (1 or 2 channels) 10 GS/s 
Maximum Record Length (All channels) Standard Config. 12.5M points (4 channels)
25 M points (1 or 2 ch) 
With Option 2RL 25M points (4 channels)
50M points (1 or 2 ch) 
With Option 5RL 50M points (4 channels)
125M points (1 or 2 ch) 
With Option 10RL 125M points (4 channels)
250M points (1 or 2 ch) 
Maximum Equivalent Time Sampling Rate 400 GS/s 
Maximum Duration at Highest Sample Rate 25 ms 
Time Base Range 250 ps/div to 1000 s/div 
Time Resolution (in ET/IT mode) 2.5 ps/div 
Time Base Delay Time Range –5 divisions to 5000 s 
Channel-to-Channel Deskew Range ±75 ns 
Time Base Accuracy ±5 ppm over any ≥1 ms interval 
Trigger Jitter (RMS) ≤10 psRMS for Edge trigger type
≤100 psRMS for all Non-edge trigger types 
Horizontal System Digital Channels 
Maximum Sample Rate (Main) 500 MS/s (2 ns resolution) 
Maximum Record Length (Main) 12.5M Standard
Up to 40M with Record Length options 
Maximum Sample Rate (MagniVu) 16.5 GS/s (60.6 ps resolution) 
Maximum Record Length (MagniVu) 10k points centered around the trigger 
Minimum Detectable Pulse Width (Typical) 1ns 
Channel-to-Channel Skew (Typical) 200 ps 
Maximum Input Toggle Rate 500 MHz at minimum input swing; higher toggle rates can be achieved at higher amplitudes 

“艾克塞普”能够根据客户的使用需求，为客户提供各种针对行业应用的完整测试解决方案，同时可以为广大客户提供**通行的**电子测试仪器租赁解决方案。我们还依托湖南工程机械设备研究中心的技术力量和****跨国公司的资源，为客户提供仪器仪表外包管理和采购管理的咨询服务。
“艾克塞普”拥有一支强大的技术开发和服务队伍，秉承“**测控，知其新，创其妙；科技无限、服务**”的宗旨，为广大客户提供基于行业应用的个性化测试解决方案以及技术咨询、售前支持和**的售后服务，在行业中享有很高的声誉。
“艾克塞普”将通过不懈的努力，为客户提供较丰富的产品选择、较经济的解决方案、较*的**服务！