PropertiesTest MethodNominal Valuesum (mil) Approximate Applied ThicknessFilm300 (12)Adhesive60 (2.4)Standard Roll Length m (yd)33 (36)Standard Roll Width mm (inches)102 (4), 152 (6), 254 (10), or 305 (12)Approximate Weight g/m2 (lb/yd2)400 (0.7)Splices Liner TypeNoPolyethyleneTensile Strength @ Break MPaISO 527-3 Type 5 die, 500 mm/min23Nominal Strain @ Break %ISO 527-3 Type 5 die, 500 mm/min430Peel Adhesion @ 21C (70°F)24-hour dwell, N/cm (oz/in)ASTM D1000 180* peelЕроxy Primer W9910: 性能测试方法标称值(密)近似应用厚度film300 (12)Adhesive60(2.4)标准卷长m (yd)33(36)标准卷宽mm(英寸)102(4),152(6),254(10),或305(12)近似重量g/m2 (lb/yd2)400(0.7)接头衬垫类型聚乙烯抗拉强度@ Break MPaISO 527-3 5型模具,500毫米/分钟23公称张力@ Break %ISO 527-3 5型模具,500毫米/分钟430剥离附着力@ 21C(70°F)24小时住,N/厘米(盎司/英寸)ASTM D1000 180* peelЕроxy底漆W9910: 9.1 (83)Rain Erosion, initial, hoursAeronordic, 140 m/s, 2.1 mm dropletDNVGL-RP-0171RET reports available upon requestUV Resistance3MExcellentHardness Shore A Gloss 20°/60ASTM D224070зM8751: 1.2/6.18781: 1.0/4.1Service Temperature "C ("F)- 40 (-40) to 70 (158)Application Temperature "C ("F)> 10 (50) 9.1(83)雨水侵蚀,初始,小时,常规,140米/秒,2.1毫米水滴dnvgl - rp - 0171ret报告可根据要求提供uv耐蚀性3mexcellenthardness Shore A光泽20°/60ASTM D224070зM8751: 1.2/6.18781: 1.0/4.1使用温度“C”(“F”)- 40(-40)至70(158)应用温度“C”(“F”)> 10 (50)