The AI-80 is a fully programmable stand alone Caller ID ** generator designed for production environments. It is capable of generating **s for all FSK and DTMF based Caller ID standards. Includes general telephone ** analysis features and a highly flexible programming language for sophisticated and complex production testing sequences. Base Unit: Tone Generator(s) Output Level *1 0 to 2.0 Vrms +/- 0.5 dB Frequency Range * 50 Hz to 10 kHz Flatness 100 Hz to 5 kHz +/- 0.75 dB THD+N 0.09% C-message weighted Harmonic Distortion > 65 dBc Frequency Accuracy 0.015% FSK Modulator Mark & Space Level *1 0 to 2.0 Vrms +/- 0.5 dB Flatness +/- 0.75 dB Mark & Space Frequency 100 Hz to 5 kHz Frequency Accuracy 0.015 % Baud Rate 100 Hz to 5 kHz Baud Rate Accuracy 0.015 % Noise Generator Output Level *1 0 to 1.0 Vrms +/- 0.75 dB Telephone Line Output Impedance 600 or 900 ohms +/- 5 % (200 Hz to 4 kHz) Line Voltage 48 V +/- 2 V Loop Current 26 mA or 45 mA +/- 15% Ring Generator Output Level 0 to 80 Vrms Frequency Range 10 Hz to 100 Hz Flatness +/- 0.3 dB THD+N 0.1 % at 22 Hz Frequency Accuracy 0.015 % Ringer Load 5 REN Level Meter Level Accuracy +/- 0.3 dB @ 1 kHz Frequency Range 10 Hz to 10 kHz Flatness 100 Hz to 5 kHz +/- 0.2 dB Maximum Input 4.0 Vrms Residual Noise < -60 dBm (C-message weighted) CPE Load DC Characteristics On-hook Impedance > 1 Mohm (0 to 200 Volts) Off-hook Impedance 230 ohms +/- 10% (at 26 mA) Maximum Loop Current 100 mA CPE Load AC Characteristics On-hook Impedance > 500 kohm (10 Hz to 5 kHz) Off-hook Impedance 600 ohms +/- 10% (at 26 mA) CPE Load Level Meter Level Accuracy +/- 0.3 dB @ 1 kHz Frequency Range 10 Hz to 10 kHz Flatness 100 Hz to 5 kHz +/- 0.3 dB Maximum Input 4.0 Vrms (normal gain) Residual Noise < -60 dBm (C-message weighted) *1 Maximum output level with an unterminated or terminated telephone line. I/O Module: (optional) Audio Output Output Level 0 to 2.0 Vrms +/- 0.75 dB *2 Output Impedance 600 ohms +/- 5% THD+N 0.09% C-message weighted Harmonic Distortion > 65 dBc Signal Source Internal Tone Generators, or Telephone Interface Monitor, or CPE Load Monitor Audio Input Maximum Input 2.0 Vrms Input Impedance 100 kohms +/- 10% Level Accuracy +/- 0.75 dB Residual Noise < -60 dBm (C-message weighted) DC Voltage Measurement Differential Input +/- 200 V maximum Common Mode Input +/- 200 V maximum (w.r.t. earth ground) Input Impedance > 1 Mohm Accuracy +/- 1% (0.2 to 200 Volts) CMRR > 60 dB Analog Input Channels (4) *3 Input Voltage Range -10.0 Volts to +10.0 Volts Input Impedance > 100 kohm Accuracy +/- 1% (1.0 to 10.0 Volts) Digital I/O Fixed Digital Outputs 8 bits Fixed Digital Inputs 8 bits Digital Input or Output 7 bits PWM Output Mode 10 bit, 1.8 kHz rep. Rate Pulse Timing Measure *4 0 to 100 s +/- 0.2 msec +ve pulses, -ve pulses, rising or falling edges Pulse Counter *4 0 to 500 kHz Gating Time 0.001 to 100 s +/- 0.2 msec Pulse Generator 0.001 to 100 s +/- 0.2 msec Async Serial Comm Port *4 1200, 2400, 9600, 19200 baud 8 data bits no parity, 7 bits odd parity, or 7 bits even parity *2 Level accuracy w.r.t. the internal tone generators *3 Analog input channels shared with digital inputs *4 Function shared with digital input/output channels Complex Line Z (optional) Line Impedance Complex #1 220 ohm + (820 ohm || 115 nF) +/- 5% Complex #2 270 ohm + (750 ohm || 150 nF) +/- 5% Complex #3 370 ohm + (620 ohm || 310 nF) +/- 5%
☆泰利信在线测试仪ICT-340系列。 ☆美国IDI高频探针100445,100526,100999等。 ☆闽台泰仕(TES)/群特及日本三和仪表全系列。 温度计,照度计,转速计,噪音计,数字式LCR表,钳表, 三相电力 表,风速计,网路测试仪,温湿度计,绝缘表,热电偶,红外温度计等。 ☆电话线路模拟器(Telephone Line Simulator) TLS-5C/D(TELTONE) ☆阳光/系统/精汇/美德:电话分析仪,电声传输测试仪,来电显示测试仪, 抗雷击测试仪,MODEM测试系统等。 ☆电话分析仪/MODEM测试仪系列: 1088A(具备电话分析仪1076A所有功能及优点,较增加了拔失 真, 及脉冲断开电阻等功能,并带RS232接口). ☆南韩精进/精讯:电话分析仪,信号发生器,调制分析仪,信纳表,频率 计,万用表电源等。 ☆二手仪器:频谱分析仪,NI/HP-GPIB卡/线,信号发生器,网络分析仪,示波器,电源,LCR 数字电桥等维修/销售与回收。