深圳助行器疲劳测试机助行器疲劳试验机操作方法 一、概述: BH-A147助行器疲劳测试机适用于有关生产厂家和质检部门对助行器疲劳耐久性试验。采用液晶屏全中文显示,触摸屏控制方式,使用方便,全部数控方式控制力度、次数。硬体采用步进电机驱动器 PLC 液晶屏方式力传感器,精度高。由程序控制以保证施力的要求。Bh-a147 walking aid fatigue tester is applicable to the fatigue durability test of the walking aid by relevant manufacturers and quality inspection departments. LCD display in Chinese, touch screen control mode, easy to use, all CNC control strength, times. The hardware adopts step motor driver PLC LCD force sensor with high precision. It is controlled by program to ensure the requirement of force application. 二、主要技术参数: 1.设备负载:190kg;递增砝码加载, 2.砝码配置:100KG(10KG2个,20KG4个) 3.加载频率:小于1HZ,1-60次/分钟可调, 4.加载周期次数:1-999999可设置 5.速度0.4/周期。0-2公里/小时可调 6.具有停电自动保存测试记录。 7.助行架采用框架固定。 8.传动皮带长宽约1000*800mm 9.机台尺寸约1400*1000*2000mm 10.数显仪表显示行驶线速度,测试次数,测试频率。 11.电源:380V,50HZ1. Equipment load: 190kg; incremental weight load, 2. Weight configuration: 100kg (10kg2, 20kg4) 3. Loading frequency: less than 1Hz, 1-60 times / min adjustable, 4. Loading cycle times: 1-999999 settable 5. Speed 0.4/cycle. 0-2 km / h adjustable 6. The test record shall be saved automatically in case of power failure. 7. The walking aid frame is fixed by frame. 8. The length and width of the drive belt is about 1000 * 800mm 9. Machine size is about 1400 * 1000 * 2000mm 10. The digital display instrument displays the traveling line speed, test times and test frequency. 11. Power supply: 380V, 50Hz