陶瓷纤维盘根 陶瓷纤维编绳 陶瓷纤维*绳 不锈钢丝增强陶瓷纤维盘根 非石棉盘根 密封绳 硅酸铝纤维盘根
简介
北京费普福工程技术有限公司陶瓷纤维盘根以高强陶瓷纤维(硅酸铝纤维、AES)为原料,经纺纱、织造而成。根据不同的使用温度,不同使用条件,加入玻璃纤维或者耐热合金丝等增强材料,使其连续使用温度达1050°C。短时间使用温度也可达1260°C。具有良好的抗酸碱腐蚀性与抗铝、锌等熔融金属侵蚀能力。
参数表
项目 数值
颜色 白
较高使用温度 1260°C
纤维直径 3~5μm
热收缩率(1232°C,24h) 3.5%
热传导率(538°C,8pcf) 0.130w/mk
Al2O3 45~48%
Fe2O3 0.7~1.2%
CaO&NaCl 0.43%
渣球含量 < 8.5%
击穿电压 5kv/mm
体电阻 5x10 10Ω
含水率 < 2%
**纤维含量 < 20%
规格表
1. 陶瓷纤维圆盘根
项目 工作温度
(°C) 直径
(mm)
玻纤增强 650 6,8,10,12,14,15,16,18,20,
25,30,35,40,50,60,70,80,90
金属丝增强 1050
2. 陶瓷纤维方盘根
项目 工作温度
(°C) 直径
(mm)
玻纤增强 650 6x6,8x8,10x10,12x12,14x14,
15x15,16x16,18x18,20x20,
25x25, 30x30,35x35,40x40,
50x50,60x60,70x70,80x80
金属丝增强 1050
应用范围
? 各种窑炉、高温管道及容器的隔热保温;
? 炉门、阀门、法兰密封;
? *门及*卷帘材料;
? 高温炉门帘;
? 发动机及仪表隔热;
? *电缆包覆材料,高温*材料;
? 隔热覆盖用布料;
? 烟道内衬;
? 高温过滤、吸音及其他代替石棉应用领域;
Introduction
Fiber Braided rope is produced by high quality refractory ceramic fiber and woven from yarn. It can be used for high temperature applications up to1050°C. The cloth is reinforced with fiberglass filament, and optional SUS304 wire (Inconel/alloy steel wire). Or even short working temperature could be reached to 1260°C. It has good resistance to acid corrosion, resistant aluminum, zinc and other molten metal erosion.
Parameter table
Type Data
Color White
Max working temp 1260°C
Fiber diameter 3~5μm
Heat shrinkage(1232°C,24h) 3.5%
Thermal conductivity(538°C,8pcf) 0.130w/mk
Al2O3 45~48%
Fe2O3 0.7~1.2%
CaO&NaCl 0.43%
Shot < 8.5%
Breakdown voltage 5kv/mm
Resistance 5x10 10Ω
Moisture content < 2%
Organic fiber content < 20%
Continuous working temp: 1050°C (1900°F);
Maximum working temp: 1260°C (2300°F);
1. Ceramic fiber round braided rope
Reinforcement Working Temperature
(°C) Diameter
(mm)
E-glass filament 650 6,8,10,12,14,15,16,18,20,
25,30,35,40,50,60,70,80,90
Stainless steel wire 1050
Reinforcement Working Temperature
(°F) Diameter
(in)
E-glass filament 1200 1/4", 3/8", 1/2", 5/8", 3/4",7/8", 1", 1-1/4",
1-1/2", 2", 3", 3-1/2"
Inconel/alloy steel wire 1900
2. Ceramic fiber square braided rope
Reinforcement Working Temperature
(°C) Diameter
(mm)
E-glass filament 650 6x6,8x8,10x10,12x12,14x14,
15x15,16x16,18x18,20x20,
25x25, 30x30,35x35,40x40,
50x50,60x60,70x70,80x80
Stainless steel wire 1050
Reinforcement Working Temperature
(°F) Diameter
(in)
E-glass filament 1200 1/4", 3/8", 1/2", 5/8",
3/4", 7/8", 1", 1-1/4",
1-1/2", 2", 3", 3-1/2"
Inconel/alloy steel wire 1900
Product characteristic
1. High temperature resistance and chemical corrosion resistance.
2. High mechanical strength.
3. Low thermal conductivity, low heat storage and thermal shock resistance.
4. Easy installation.
5. Asbestos free.